Prepare bobbins and pirns quickly and accurately with Leclerc’s Complete Electric Bobbin Winder. Outfitted with an adjustable tension device, built‑in yardage counter, and foot‑pedal speed control, this studio‑ready tool saves time, protects your yarn, and supports reliable selvedges from the very first pick.
Key Advantages
- Foot‑Pedal Speed Control – Variable RPM lets you match winding speed to fine, medium, or bulky yarns without stressing the fiber.
- Integrated Tension Device – Delivers firm, even take‑up so weft releases smoothly during weaving and your bobbins stay “solid,” not springy.
- Precision Yardage Counter – Measures in 0.1‑yard (or 0.1‑meter) increments up to 999.9, ideal for sectional warping, production runs, or keeping project notes.
- Double‑Ended Design – Tapered steel shaft fits Leclerc 4" and 6" plastic bobbins, Leclerc spools, and most pirns or cones 2.75–8" (7–20 cm) long.
- Maple Base & Sealed Bearings – Quiet operation and long service life with minimal maintenance (a drop of sewing‑machine oil on the pivot twice a year is plenty).
- Table‑Edge Clamp (≤ 1½″ | 4 cm) – Keeps the winder stable while saving countertop space; no permanent installation required.
Who Finds It Helpful?
• Frequent weavers who want to wind multiple bobbins every session
• Sectional‑warping users who rely on exact yardage per section
• Production studios aiming for consistent selvedges on long runs
• Anyone seeking to reduce hand strain caused by manual winding
Specifications
- Motor: 120 V AC with foot controller (variable speed)
- Turning Ratio: 1 turn of handle : 7.5 rotations of bobbin
- Accepts Bobbin Lengths: 2.75–8″ (7–20 cm)
- Base Material: Lacquered Canadian maple
- Clamp Opening: up to 1½″ (4 cm)
- Overall Size: 15″ L × 6″ W × 6″ H (approx.)
- Weight: 5 lb (2.3 kg)
- Counter: Imperial (yards × 0.1)
What’s in the Box
- Electric winder with pre‑installed foot pedal
- Adjustable tension arm
- Yardage counter (imperial)
- Table clamp & hardware
- Illustrated setup guide
Simple Care Tips
- Remove stray fibers around the pulley after each winding session.
- Add a single drop of sewing‑machine oil to the main pivot every 6 months.
- Store with the foot pedal unplugged to prevent accidental starts.
Frequently Asked Questions
- Can I slow it down for very fine singles?
Yes—use gentle pressure on the foot pedal; if you prefer an extra‑low start speed, plug the pedal into an inline dimmer switch rated for small motors.
- Does the counter work with the tension box?
Absolutely. The counter bracket lines up with Leclerc’s tension‑box exit guides for accurate sectional warping.
- Will it fit non‑Leclerc pirns?
Most wooden or plastic pirns seat well on the tapered shaft. For oversized centers, wrap a bit of painter’s tape on the shaft for a snug fit.
- Is assembly required?
Only the clamp and tension arm need to be attached—takes about five minutes with the supplied hardware.
Ready to wind faster and weave sooner?
Add the Leclerc Electric Bobbin Winder – Complete to your studio and enjoy smooth, evenly tensioned bobbins every time you sit at the loom.
